Maintain Your Tractor Performance on top

Buried beneath the sheet metal, under the gas tank, or stuffed in front of the radiator is the tractor battery. This elusive and neglected component of the tractor is the hardest to get to when it is dead and in need of a jump. But usually, the automobile battery is a storehouse of electrical energy waiting to be released at the flick of a switch. A few maintenance tips and periodic cleaning will keep it charged for the duration of its life span.

Even though the tractor battery appears tough and rugged it is important not to wrestle and jostle it around. As an automobile battery ages, sediments from the charging and discharging cycle collect in the plastic grid at the bottom of the cells. Shaking or rough handling of an older tractor battery can loosen some of this material and cause it to lodge between the positive and negative plates. This can short out a cell and ruin the tractor battery. When viewing down the cell filler plugs a cloudy appearance of the acid solution can indicate a shorted cell.

As mentioned earlier, the amount of lead plates in each cell determines the amperage capacity of that cell. Therefore, a high amp tractor battery will have a larger number of lead plates in the cell than a lower capacity tractor battery. Sometimes, though, this extra number of plates has to be installed in a tractor battery case of the same size as a lower capacity. In order to do this the Company makes the thickness of the lead plates thinner so as to fit more plates in the same area. There is only so much capacity that can fit into a given space. That is why tractors or trucks with large engines that require large electrical capacity to start have two or more large batteries. The extra plates needed to create the necessary capacity and give adequate tractor battery life before the plates disintegrate from the chemical reaction require the added size. Take care in moving around the higher capacity batteries because the cell structure with added plates tends to make them a little more fragile.

Many tractor and truck batteries have the filler plugs or ports in them as previously mentioned. These ports have a dual purpose. When a tractor battery discharges and recharges the chemical reaction process produces hydrogen as a by-product. The filler caps provide venting for this highly explosive gas to the atmosphere. When working with automotive battery, always make sure any electrical load is turned off before removing the battery terminals. When charging an automobile battery, take care to unplug the charger when connecting or disconnecting the charging clips to the battery terminals. Even the smallest of sparks can ignite the escaping hydrogen and cause the battery to explode. While jump starting the tractor battery, instead of clipping the negative clamp to the battery terminal, clip it to a grounded bolt or engine component away from the tractor battery location. The corresponding spark from the charging vehicle will be controlled and isolated away from the tractor battery, thereby avoiding a potential explosion. The second use for the ports is so one can replenish the water supply in the tractor battery. Make sure and use only distilled water. Regular water from the tap can have impurities in it that will shorten the cell lifespan. Dissolved lime, for instance, can neutralize the Sulphuric Acid if used in sufficient quantities. Other impurities can coat the lead plates with a microscopic film and reduce the effectiveness of the electrical reaction. Make sure and not overfill the cell; fill it to the base of the plug hole, and try to fill the cells while they are in the charging mode.

Now that we have a basic understanding of the tractor battery lets discuss in further detail about its maintenance. An often neglected component of a tractor battery is its hold down straps. An unsecured tractor battery is an accident waiting to happen. The bouncing of a vehicle, especially a tractor over a plowed field, can cause a tractor battery to scoot around in its housing and possibly short out against another metal component causing a fire. If not that, it can certainly break a terminal, cable, or case. Purchase a tractor battery hold down kit and install it. It is cheap insurance against tractor damage and will increase the life span of the tractor battery. Another great investment is a tractor battery terminal remover tool. This cool tool looks like a small gear puller with clamps. After the terminal bolt is loosened, the puller makes removal of the terminal an easy job. Don’t screw a stuck terminal back and forth or use a screwdriver to try and pry it off. You can inadvertently crack the tractor battery case or break the seal between the case and the protruding terminal. A puller is cheap, easy to use, and does the job correctly. Once the terminal end is removed, inspect the mating ends for corrosion, pits or cracks. A tractor battery terminal cleaner works great for removing corrosion build up. This tool has two wire brush ends; one male, the other female. Use it to brush the ends until they shine. Sometimes a terminal end will have a hard blackish coating on it. This lead oxidation stops the electricity from flowing and creates excessive heat at the connection. It won’t always come off with the wire brush so you may have to use a small file. Make sure to rotate the file around the terminal as you go so you won’t create a lot of flat spots. Don’t remove too much material, and then tidy up the terminal with the brush. If the bolt is corroded, replace with a new one. Excessive corrosion on the cable terminal can be removed by submersing the end in a coffee can of water and baking soda solution for a while. Remove, dry and then wire brush the mating parts. Terminal ends that are pitted, cracked, or missing due to acid corrosion, should be replaced. It is best, in the long run, to replace the entire cable rather than merely an end. If the terminal end needs replacing, the chances are good that the reason for damage has made its way up the cable under the insulation where it can’t be seen. Examples could be unseen corrosion damage, copper strands that have been too hot from resistance and have burned themselves into the insulation, or have been heat damaged, or have internal strand breakage.

After removing the hold down strap and terminal ends, remove the tractor battery from the tractor and place on a plastic box or covering. Hose down the top of the tractor battery and brush off the accumulated debris. Take a towel and dry off the entire casing. Remove the filler ports and check the levels. Place on charger and fill accordingly. One way to test the integrity of the tractor battery is to check the specific gravity of each cell. A hydrometer, available at local auto stores, will measure the electrolyte acid content. It is best to read the directions that come with the tester thoroughly as variations due to temperature and states of charge can make the readings hard to interpret accurately. An easier method to determine tractor battery integrity is to do a load test. With the tractor battery installed in the vehicle, attach a voltmeter to the tractor battery terminals. Ground the coil to keep the engine from starting and crank the motor over for 15 seconds. If the tractor battery voltage stays above 9.6 volts, then the tractor battery is in a reasonable state of charge. Below that amount indicates a shorted cell or a lowered capacity due to the tractor battery reaching its useful life.

When reinstalling a used or new tractor battery, use a terminal conditioner on the cable and terminal ends. The conditioner comes in a spray can and goes on like a red paint. The coating retards tractor battery acid corrosion and lead oxidation and will lengthen the time between cleanings. One can also install felt pads onto the tractor battery posts which have been saturated with baking soda. These also tend to retard acid corrosion. The negative cable has the smaller end and goes to the corresponding terminal. Don’t drive the terminal ends onto the posts using a hammer. The jarring action may damage the internal connections of the tractor battery. Instead, use a terminal spreader. Don’t over tighten the terminal bolts as you can cause stress cracks on the ends. Reinstall the hold down brackets or straps making sure not to over tighten which can cause war page and/or breakage of the tractor battery case.

If a tractor battery is to be removed for the winter months, take a few moments to ensure that it will be in good condition when spring comes. Clean the casing and dry with a towel. Clean the terminal posts and check the electrolyte level. Place the tractor battery off of the floor, preferably on a wooden bench or shelf. Batteries left on concrete floors will lose their charge in a few short weeks. Place a trickle charger on the tractor battery to bring it up to charge. Some chargers have an automatic shut off switch that will shut the unit off when the tractor battery comes up to a full charge, and then turn it back on when the charge falls below a predetermined level. This type of charger can be left on all the time. Other chargers must be removed to prevent overcharging. When the tractor battery is fully charged store it in a cool, dry location out of the way of kicking feet or falling tools. A light coating of petroleum jelly on the posts will prevent any lead reaction to the elements. When spring comes the tractor battery should be ready to go back to work for your tractor.

Truck batteries are subjected to frequent failure because of deep discharge

The mechanism of a battery

A car battery is used to store electrical power in reserve to be used when the car engine is started. Several conditions can occur that will cause a battery to lose its charge overnight. There are several "live" electrical circuits that can draw electrical power from the battery when the key is in the off position. The thing that stocks energy to be used for future is called battery. The actual mechanism of a battery is the conversion of chemical energy into electricity by making use of a galvanic cell. At times the process can also involve the use of more than one galvanic cell. Batteries are the storing points of electric energy. With the alteration of the chemicals in the battery, electrical energy is radiated and stored but never produced. There is a continuous recurrence of the mentioned process in case of rechargeable batteries. However, a lead acid battery works with lead oxide as positive and pure lead as negative. Batteries are the raw source of power that sets your vehicle rolling on the roads. In case of a truck, choosing the right battery with strength and quality is what makes your vehicle run longer.  The performance level of a truck battery does not only depend on its consistency but also on a regular process of checking.

Battery Preservation

The need of maintaining a vehicle battery lies with its life expectancy. Regular checks of the battery by following some easy steps would surely make your truck battery run longer:

• The battery should be safely placed to the cradle as well as the connection between the cable clamps and lead wire should be rightly done.
• The battery should be kept clean and dry. No use of grease should be done. Use of petroleum jelly in the cable clamps and terminals will help keep them lubricated.
• Acid is barred. Distilled water could be used to maintain the level to the maximum.
• The vent plugs should always be tightly closed.
• Vent hose in the battery should never be damaged or crumpled by the exhaust system.
• Vehicle’s electrical system should be kept under regular checks. Examining the regulator voltage setting is also necessary.
• Frequent battery servicing from the nearest authorized dealer is important.

                           

As a battery ages it loses its ability to hold a charge, as a rule of thumb a battery will last about three to four years. If the battery is fairly new you will need to start the engine by jump starting or charging the battery using a battery charger. Once the engine is running test the alternator in the charging system. If the alternator fails, replace it with a new or rebuilt unit and re-test system, if the alternator tests ok proceed to the next step.

• This first test is simple but you would be surprised at how many people simply leave their headlights on overnight. If the battery is dead check the headlight control switch. If the switch is in the on position turn the switch off and jump start or charge the battery. The battery should re-gain its state of charge after about 15 minutes of driving and your problem will solved. If headlight switch is off proceed to next step.
  Inspect the glove box illumination light, in most cases this light is controlled by a small pin switch. If this switch malfunctions or is misaligned it will allow the glove box light to stay on draining the battery down overnight. To check for this condition look for the light inside the glove box through the small cracks in the glove box door. If this light is illuminated when the glove box door is shut replace or readjust the switch to operate properly and recheck light operation. If it tests ok proceed to next step. 
  
• Inspect the trunk illumination light, in most cases this light is controlled by a small pin or a mercury level switch. To test the trunk light operation observe the light as you close the trunk lid, the light should go off when the trunk lid is nearly shut. If the light doesn't go off replace or readjust the switch and recheck operation. If it tests ok proceed to next step.
  
  
• Inspect the hood (covers the engine) illumination light, in most cases this light is controlled by a small pin or a mercury level switch. To test the hood light operation observe the light as you close the hood, the light should go off when the hood is nearly shut. If the light doesn't go off replace or readjust the switch and recheck operation. If it tests ok proceed to next step.
• Debris can cause an electrical draw like a penny or a gum wrapper. Anything that can cause an electrical draw will drain the battery power. If debris is found remove it with a small pair of tweezers. (Note: sometimes when inserting tweezers or removing debris from the cigarette lighter a fuse can blow, if so replace the fuse with new after the debris has been removed) If the lighter is ok proceed to next step.
• Inspect the electric seat control switch, this switch can become sticky or weak allowing the switch to stay engaged forcing the seat motor to draw power from the battery until dead. To check for this condition observe the operation of the seat control switch if it does not return the neutral position or is sticking in one position replace the switch with new and recheck.
  
•  If no other electrical accessory is causing the battery to drain overnight a manual draw check of the electrical system will need to be performed. What this means is you will be checking the electrical draw the battery has on it when the car is locked up, with the key in the "off" position". First open the hood and disable the under hood illumination light, if equipped. Next, with the key off and the doors locked wait 15 minutes, then disconnect the battery cable on the negative side. (The 15 minute wait allows the computers to go into "sleep mode" and shuts down all electrical). Attach a test light between the negative battery cable end and the negative battery terminal. The test light should illuminate dimly or not at all. If the test light is on brightly there is a strong electrical draw in the system. To locate this electrical draw start removing fuses one at a time. When the test light goes out the circuit in question has been located. You will need a car repair manual to identify all accessories in a particular circuit, repair as needed and re-check system.

SF Sonic truck batteries

SF Sonic is a name suggestive of power.  SF Sonic gives us the best truck batteries in India that are outcomes of elaborate and detailed R&D and a tough quality control. The grid alloy technology used for making these batteries establishes symmetry between performance and durability. A SF Sonic two and four wheeler battery has been widely accepted for its resilience. SF Sonic’s Industrial Range of lead acid batteries is perfect to withstand the predicaments of Indian roads. The UPS, inverter and genset batteries of SF Sonic are sought after for their dependability. With SF Sonic, one can avail the advantage of buying auto batteries online. SF Sonic only does not let you get the right battery but also helps in its maintenance. This includes the responsibility of systematic checking of the battery as well as battery exchange and buying.

Best battery for all commercial vehicles with a very high power requirement

A four wheeler battery, be it for car or truck, operates by means of sleek plates that offer greater surface area with an idea to create greater power for your car to run. Car and truck batteries are potent sources of power that determine the caliber for four wheelers. Making the right decision about the choice of a battery is what ensures the performance of your car. Talking about a truck or car battery, the first name that strikes is SF Sonic. Four wheeler batteries of SF Sonic are always preferred for the durability as well as for the active service available for their maintenance. One of the frontrunners in the battery trade, the range of SF Sonic heavy vehicle batteries has been given special emphasis for being economical and superior at the same time. Most battery reviews highlight these advantages of SF Sonic. 

Essential characteristics of SF Sonic Car and Truck batteries

• Survive the worst of road conditions: If you are suddenly left to any kind of impediments on road, be sure to overcome those with your car having a SF Sonic battery.
• Unbelievable power for prompt ignition: With a SF Sonic battery in it, your four wheeler’s system promptly spontaneously responds to every attempt of starting it.
• Shields against all kinds of jerks and shocks: The understandable unevenness of Indian roads will not let your car falter when you have a SF Sonic battery in it.
• Designed judiciously to last longer: SF Sonic truck batteries have been structured keeping in mind the need to run longer than usual.
• Excellent capacity to start and resist: Conditioned to all the harshness of external factors, your car will stand up to all the oddities with better resilience with a SF Sonic battery.
• Easy for usage and maintenance: SF Sonic four wheeler batteries are very convenient to use and deal with. It is advisable to stick to them for better yields in future.
• Factory-charged for instant performance: A car with SF Sonic battery is sure to give you desired performance as it comes in the factory-charged state.

The maintenance of battery

For every vehicle, maintenance is an extremely significant concept. The major part of the maintenance procedure involves handling of batteries in the most proper way. To preserve your vehicle in a working condition for long, the most important step is to wisely choose the right battery for it. Though this partially addresses your concern of sustaining a car or truck battery, it does not totally solve the problem. Battery maintenance is a meticulous process, if done in the accurate way. Each of us is aware that the better a battery is maintained the healthier it proves for your vehicle. Thus, keeping the battery in the right state for a longer period of time is actually beneficial for your vehicle. This is the reason the battery maintenance services have gone through a lot of revisions in the recent past. Most of the manufacturers of automotive batteries have introduced the convenience of free battery maintenance. There are also facilities of emergency support provided by many of these battery manufacturers. Just a call to them during any auto electrical failure is enough to sort out the issue. The battery price hike in recent times is because of the inclusion of maintenance services. Such impromptu services are sure to get your vehicle out of problems, be it in starting the vehicle or just a battery concern.   

The more improved Dual Four Wheeler Batteries

Many battery manufacturers launched the facility of a Dual Battery System. Sharp contrasts to the flooded batteries of truck, Dual Batteries are the next best invention in this sphere. Unlike the flooded batteries that act as a source of energy for ignition as well as electric vehicles, the new Dual Battery System operates on two AGM batteries to put the engine on start along with two GEL batteries for electric vehicles. This stands as an enhanced technology that prudently works for the best possible performance. The Orbital batteries provide maximum power as far as cranking of the engine is concerned. As soon as the engine starts functioning they get recharged and stop working. Again when the engine is put off, power gets supplied through the GEL Batteries. It is during this time period that that the AGM batteries become abundantly recharged.

Four wheeler batteries selection from India's four wheeler battery manufacturers

How does a battery work?

An object that stocks energy to be used for future is called battery. The actual mechanism of a battery is the conversion of chemical energy into electricity by making use of a galvanic cell. At times the process can also involve the use of more than one galvanic cell. Batteries are the storing points of electric energy. With the alteration of the chemicals in the battery, electrical energy is radiated and stored but never produced. There is a continuous recurrence of the mentioned process in case of rechargeable batteries. However, a lead acid battery works with lead oxide as positive and pure lead as negative. Be it an automobile battery, an inverter battery or an UPS battery, the worth lies in the supply of power.  

Importance of battery

Owning a vehicle always leaves us with the concern of its performance. It is an open secret that performance of a vehicle is mostly dependent on the battery it operates on. The most important part of a car is its battery. It’s the strength of the battery that defines the strength of the car. In other words if you want to keep your car running, you got to choose the right kind of battery. Followed by that comes the most important part of its maintenance. It is quite understandable that the longer the battery lives the better your car survives. However, in the recent years, car battery service in our country has gone through robust transformations. Lots of battery manufacturers also bring the offer of free battery maintenance. Sometimes just getting the battery registered with the manufacturers guarantees long term maintenance for your car battery. This includes the responsibility of systematic checking of the battery as well as battery exchange and buying. Some manufacturers are kind enough to the offer emergency service facilities that address auto electrical emergencies of vehicles, no matter where and when. 

As crucial it is to know the exact manner of up keeping a 4 wheeler battery, equally significant it is to be aware of the right way of battery handling. Mismanagement of batteries can lead to undesirable hazards.       

Choosing batteries

Batteries are the raw source of power that sets your four wheelers rolling on the roads. Choosing the right batteries with strength and quality is what makes your vehicle run longer.  The performance level of the battery does not only depend on its consistency but also on a regular process of checking. Therefore battery maintenance becomes as important as choosing it. The idea of registering your battery with the company from where it is bought is the wisest way to keep it safe. This not only means getting all your automobile issues addressed but also getting requisites like battery recharge or battery replacement in place. 

Maintaining Batteries

The need of maintaining a four wheeler battery lies with its life expectancy. Regular checks of the battery by following some easy steps would surely make your automobile battery run longer:

• The battery should be safely placed to the cradle as well as the connection between the cable clamps and lead wire should be rightly done.
• The battery should be kept clean and dry. No use of grease should be done. Use of petroleum jelly in the cable clamps and terminals will help keep them lubricated.
• Acid is barred. Distilled water could be used to maintain the level to the maximum.
• The vent plugs should always be tightly closed.
• Vent hose in the battery should never be damaged or crumpled by the exhaust system.
• Vehicle’s electrical system should be kept under regular checks. Examining the regulator voltage setting is also necessary.
• Frequent battery servicing from the nearest authorized dealer is important.

Servicing of batteries

The best car or truck batteries is the one which comes with the warranty of their manufacturers. Buying battery is always easy, one can either opt to buy online or visit the nearest car battery store to get hold of a battery of choice. However, the problem starts when there is any kind of battery failure. In such a case it is good to avail at hand services made available by many battery manufacturers across our country. Now days there are many exclusive stores that facilitate superior and multifarious service assistances. Such utility stores extend end to end power solutions by means of some great products and unique services. The conveniences extended by showrooms are always beneficial for people who seek one stop solutions for their problems.